Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: du24pont24 on February 27, 2016, 10:42:36 pm

Title: rowe cd100a wire harness problem
Post by: du24pont24 on February 27, 2016, 10:42:36 pm

Can anyone tell me were I can find the metal end that clips into the harness.  It should be on the end of the loose wire!   Or do I havewe to buy a whole new harness and splice the 3 wires together?  Also what is the wire I would need to buy, the wire is very short to plug into the harness.
Thanks for any info!

Title: Re: rowe cd100a wire harness problem
Post by: lilshawn on March 03, 2016, 02:27:41 pm

They are all standard connectors.  You should be able to buy one and crimp on a replacement.

If you are brave you can plug the pin connector out and reattach the wire and then reinsert it.

Title: Re: rowe cd100a wire harness problem
Post by: du24pont24 on March 13, 2016, 10:13:33 pm

Where would I purchase the connector???  radio shack?   lowes??/ menards??? 
Is a web site I could buy from???   Thanks!!!

Derek

Title: Re: rowe cd100a wire harness problem
Post by: lilshawn on March 14, 2016, 02:34:54 am

I want to say JST XH series connector.  I'd have to dig up an manual to find out for sure.

A dataset for them can be found here...   

http://datasheet.octopart.com/XHP-4-JST-datasheet-8325564.pdf (http://datasheet.octopart.com/XHP-4-JST-datasheet-8325564.pdf)

Takes some measurements and compare them to see.


Ebay or mouser or any large electronics place would have them.