Build Your Own Arcade Controls Forum
Arcade Collecting => Merit/JVL Touchscreen => Topic started by: brtlkat on February 13, 2016, 04:27:31 pm
-
Bought a 2011 key/dvd update for my 2006.5. 2011 Installed fine, rebooted all the way to megatouch force splash screen then KEY RANGE MISMATCH. Searching I see there was a patch for this or is there another way around it. I reinstalled software no go, cleaned key holder bent pin slightly. I put 2006.5 back in and it booted fine.
-
I seems there support site is down. I put it up on sendspace.
https://www.sendspace.com/file/jreeh4 (https://www.sendspace.com/file/jreeh4)
-
Sweeet thanks so much. Do I burn to dvd then update?
-
Ok. When I put it on a usb. It finds update and then says failed to find tarball file and then fails update. Not sure if I'm doing it correctly.
-
Can you take a pic of the fail screen?
According to an old cached webpage, the .tgz i uploaded is the correct one for 2011 force. Does the software find the update during the boot process? Also, what version 2011 force is on your install disc?
Make sure you format the usb thumb drive with rufus and use fat32 then add that .tgz to the main root of the thumb drive.
-
Hi just pmed you. On my end I have a update file and a usr file. Not in .tgz form. In total 2 files.
-
I can get a pic of the fail point.
-
version 28.30t it said when installing it.
-
pic of fail
-
Hi just pmed you. On my end I have a update file and a usr file. Not in .tgz form. In total 2 files.
The link i gave you should give you one single .tgz file. You put that file directly onto a fat32 formatted thrumb drive and boot the system with it plugged into a usb port. It should automatically take the update.
-
The link gave me a zip file and I unzipped and seen 2 items a update file and a usr file folder,,, no .tgz file
-
snap shot of the download
-
The link gave me a zip file and I unzipped and seen 2 items a update file and a usr file folder,,, no .tgz file
Its not a zip file. Its a gzip archived tarball. Just download it as is and put it on a thumb drive.
-
The link gave me a zip file and I unzipped and seen 2 items a update file and a usr file folder,,, no .tgz file
Your screenshot literally shows it's a tgz file in the title bar...
-
Hi just pmed you. On my end I have a update file and a usr file. Not in .tgz form. In total 2 files.
The link i gave you should give you one single .tgz file. You put that file directly onto a fat32 formatted thrumb drive and boot the system with it plugged into a usb port. It should automatically take the update.
Thanks Mike Got it going ;D