Build Your Own Arcade Controls Forum
Main => Project Announcements => Topic started by: haf_k on February 11, 2016, 04:35:01 pm
-
Sharing my excitement for this one..I created my own sketch and design.
Everything is from Plexiglass. The heart is an old Sony Laptop 10"
I removed the screen and installed the laptop on the bottom.
Then I put the screen in place limited from the screen internal cable length.
Initially I decide to cut and extend it but when I saw how many tiny cables wee inside I decided to keep it as is.
Joystick Sanwa, controller and illuminated buttons from EBay (Chinese brand)
The front panel is copy from weecade and I did some changes to artwork in order to fit the buttons.
Front letter created with dremler mini table saw and illuminated with LEDs
Vynil stickers and ready
(http://uploads.tapatalk-cdn.com/20160211/f3d7c8a60d1090c860e5a6d25d1112a1.jpg)
(http://uploads.tapatalk-cdn.com/20160211/c1030386a6a1abb379537359768695d8.jpg)
(http://uploads.tapatalk-cdn.com/20160211/dc1e23d28c7038acc2af7e3e0b5b072d.jpg)
(http://uploads.tapatalk-cdn.com/20160211/470a9f1a597e805bfd614ee4670987af.jpg)
(http://uploads.tapatalk-cdn.com/20160211/305f563a4c0aac1178b0c400b40623f2.jpg)
(http://uploads.tapatalk-cdn.com/20160211/e565b4709aaae297fcd5f9d59fb30219.jpg)
-
(http://uploads.tapatalk-cdn.com/20160211/e17dc35debbb624c8dfdf77d5961c407.jpg)