Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: bartonbrass on January 27, 2016, 04:08:25 pm

Title: Rowe cd100d
Post by: bartonbrass on January 27, 2016, 04:08:25 pm

We have a Rowe cd-100d, when I play a cd the cd spins up then stops, then it will spin backwards, do that a couple times then stop.  I looked at the diagnostic codes and service manual and can't figure out what I should check/do next.  We've had the JB for years and haven't had any issues.  I did unplug all the wires from the ccc and make sure they were seated properly.  Also we have no neon lights, any help would appreciated: )

Thanks!!
Jake

Title: Re: Rowe cd100d
Post by: jdemarti on January 28, 2016, 09:42:31 pm

Could be a bad optical pickup unit (laser) or the turntable motor. Worst case could be the circuit board in the player is bad. 

Title: Re: Rowe cd100d
Post by: bartonbrass on January 31, 2016, 09:54:01 pm

I'm supprised that it not saying out of order.   It looks like if it was the CCC the board error led would be lit.   Wonder how I would check to see if the optical pickup is bad?

Title: Re: Rowe cd100d
Post by: ed12 on January 31, 2016, 10:17:11 pm

please list the error code./'s

ed

Title: Re: Rowe cd100d
Post by: ami-man on February 01, 2016, 06:33:21 am

Hi Jake,

We need more information regarding your jukebox.

CDM? what type of laser is fitted CDM3, CDM4, CDM12, CD-PRO.

I agree we also need the error codes that you saw on the jukebox.

Regards
Alan

Alan Hood
ami-man
UK