Build Your Own Arcade Controls Forum
Main => Software Forum => Topic started by: Duhjoker on January 17, 2016, 01:57:12 am
-
Using mala front end with a dell optiplex with 3450 graphics card. I had to turn the OS screen using catalyst and did some more config in mala to get the screen turned right for my cocktail cabinet. Every thing works fine but I downloaded and installed Fusion for sega game gear and when i start it from either mala or from its emu the full screen is going horizontal not vertical with everything else. I managed to turn the screen in fusion to the right direction but the controls are all funny. Up is left down is right and so on n the joystick.
The other thing I wanted to ask was if there is way a way to split screen nullDC for the fighting games so they are head to head on the cocktail?
-
I could also use help getting psxfin to go to full screen. I read somewhere about changing an F switch? It also had a link to follow to tell you how but that link is dead. Does anybody know how to do this?
I am literally running around in circles trying to find out how to change the switches.
-
psxfin - try this:
https://sites.google.com/site/ultimasites/psx-frontend
alternatively, cl switches found further down page here:
https://emvoy.codeplex.com/wikipage?title=Emulator%20Setups&referringTitle=Documentation
-
Ok the front apps, is this a background type? Will I still be able to access psxfin through my mala front end?
I solved the problem with the joystic controls on the fusion I just reversed the controls L & R are up and down and up down left and right.
Now if could get nullDC to split screen I would set.
-
Dunno. Try it. And, you're welcome.
-
Yes thank you!!!!!
-
I tried the front end app but could not get it to work. But if some one knows the correct commamd line i can enter that into the mala command line for that emu and it should work. It worked for nulldc at least.
I tried a couple combinations i found on previous posts but none worked.