Build Your Own Arcade Controls Forum

Software Support => GroovyMAME => Topic started by: jmcginley on January 13, 2016, 04:08:52 pm

Title: Should I use the CGA/EGA input or the VGA input?
Post by: jmcginley on January 13, 2016, 04:08:52 pm

I'm planning on running GroovyMAME and CRT Emudriver with a Radeon 4xxx series card on my Wells Gardner D9200. It has an input for either CGA/EGA or VGA. In order to run all MAME games as close to their original resolution and refresh rate as possible, which input should I be using?

Title: Re: Should I use the CGA/EGA input or the VGA input?
Post by: Calamity on January 13, 2016, 05:22:48 pm

You can only use the VGA as far as I understand.

Title: Re: Should I use the CGA/EGA input or the VGA input?
Post by: jmcginley on January 14, 2016, 08:33:25 am

Thanks, Calamity. I'll make sure I connect through VGA then. I can just connect a VGA cable from my graphics card tot he VGA port on the monitor then? No converters or any other equipment necessary?

Title: Re: Should I use the CGA/EGA input or the VGA input?
Post by: DudeRegular on January 14, 2016, 11:34:42 pm

You should be fine doing that.