Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: sollyscomputers on January 11, 2016, 11:56:58 pm

Title: 4 ohm speakers on a 60 in 1
Post by: sollyscomputers on January 11, 2016, 11:56:58 pm

Hi guys,

Can someone tell me if I can connect 2 x 4 ohm speakers on my 60 in 1 jamma board through a small stereo amplifier for arcades

Thanks

John

Title: Re: 4 ohm speakers on a 60 in 1
Post by: behrmr on January 12, 2016, 09:15:06 pm

If you use the "headphone jack" that should be line out so you can pipe that into your amp.  If you are using the JAMMA audio out pretty sure you need an 8 ohm load so you could wire your speakers in series and not use an amp since the 60-in-1 has an on board amp (power by +12V from your power supply).

Title: Re: 4 ohm speakers on a 60 in 1
Post by: sollyscomputers on January 14, 2016, 05:32:16 am

Thanks,

I'm not using the card's sound, I'm running the sound through a seperate little amp so hopefully it'll be OK

John