Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: DocHolliday on December 19, 2015, 10:13:27 am

Title: Hyperspin \ Hyperlaunch Q + S
Post by: DocHolliday on December 19, 2015, 10:13:27 am

I did a windows 7 64 bit build with Hyperspin, and when we play two players games like nba jam, it's tabbing back to the main hyperspin screen when the Q + S (Player 2 button 2 and 3 keys) are pressed.

I went into hyperlaunch and changed the exit keys to some that weren't used at all, this didn't help.   It still does it.
I went back into hyperlaunch and removed the keys in those entry boxes for the exit script completely, this didn't help.   Still does it.

Any suggestions?   I can't see why it continues to do this.   I don't want to remap my player 2 keys because I have so many games and systems that it would take quite a while.   I would rather fix the issue if possible.

Thanks for any feedback.

Title: Re: Hyperspin \ Hyperlaunch Q + S
Post by: langlem on December 22, 2015, 01:55:25 pm

its been awhile.....but I had a similar issue.  Had to disable auto hot keys in graphics resolution window...hope I am not sending you on a wild goose chase.  I have been updating things for the last few months and my head is literally (hyper) spinning.

good luck

Matt

Title: Re: Hyperspin \ Hyperlaunch Q + S
Post by: bearzilla333 on January 08, 2016, 07:13:58 pm

HyperlauchHQ, Global, General settings, controls, Exit Script key, change it to a key you dont use, dont leave blank it will go back to default which is Q and S.