Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: NoodleLeopard on December 12, 2015, 02:30:39 pm
-
I recently got my JPAC and I'm trying to update the firmware and configure it, but none of the software detects the device at all. Neither the u-hid, firmware updater, or winipac sees a board as "detected". The board installs just fine and shows up in my devices.
-
You're best bet will be to contact Andy Warne at Ultimarc.
He's very helpful with product support.
He's a member on here but you'll need more posts before you'll be able to pm him so it may quicker to
Contact him via his website
-
you'll need more posts before you'll be able to pm him
FYI, Saint changed that when we started doing first-post approval in August.
PMs are enabled for Jr. Members. (Jr. Member = 1 approved post since August 5th) ;D
Scott
-
Thanks for the quick replies!
-
you'll need more posts before you'll be able to pm him
FYI, Saint changed that when we started doing first-post approval in August.
PMs are enabled for Jr. Members. (Jr. Member = 1 approved post since August 5th) ;D
Scott
Cool, I didn't know that
-
I recently got my JPAC and I'm trying to update the firmware and configure it, but none of the software detects the device at all. Neither the u-hid, firmware updater, or winipac sees a board as "detected". The board installs just fine and shows up in my devices.
Probably the wrong version of the WinIPAC program is being used, email me for help: andy@ultimarc.com
-
Like I said, he's very helpful.
-
I'm the one emailing you currently about this problem. I'm pretty sure I'm using a 2015 board since it displays REV_0030. I'm also using winipac v2 which I thought was suppose to be the correct version.
Update: I ended up using the older version of winipac, but I could've sworn I read somewhere that rev0026 and up is a 2015 version of the board