Build Your Own Arcade Controls Forum
Main => Driving & Racing Cabinets => Topic started by: Dutsk on December 08, 2015, 08:54:44 pm
-
Hi all
Been looking at converting my Cruisin Exotica to a console cabinet as I bought it w/o the arcade pcb in it. I was wondering a few things about the game. Already looked through the manual.
Is it single or dual axis?
What size are the pots? EDIT:::::: I've found out they are 5k ohm
What is a good easy console wheel to hack that could be compatible with existing arcade parts?
Please help Before I break out the multimeter and poke around where I am uncertain.
Below is all I get from manual
-
Is it single or dual axis?
Page 86 of the manual here (http://www.arcade-museum.com/manuals-videogames/C/Cruisn%20Exotica%2039in%20Feb%202000%201640077001%20Operations%20English.pdf), right side, 2/3rds of the way down you can see the foot pedals part of the schematic.
The two pots are wired in parallel -- both have 5v to tab 1 (or 3?) and both have ground to tab 3. (or 1?)
Both pots have an output on tab 2 -- brake on ORG VIO wire, gas on ORG GRY.
This is a standard "dual axis" configuration.
What size are the pots?
Steering pot P/N 5014-12909-00 is a 5k. Twisted Quarter has them here (http://www.twistedquarter.com/index.php?main_page=product_info&products_id=694).
Pedal pots P/N 50-8026-00 (or 96-4916-00?) are also 5k.
Scott