The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: newkid3 on December 06, 2015, 11:42:52 am
-
Hello all, i am new here. I hope someone here can help me on this monitor. It is a patranic 1425. It is in a golden tee 2004 cabinet. The guy that had it before said it worked fine until one day the monitor just quit working. So i recapped it. Now i get the picture but i can not get it to adjust out right. I have adjusted the remote board in every way possible. I have no luck. I am going to post a couple of pics. If anyone has any ideas of what could be my problem please let me know. Thanks
-
photo is too small for me to see but it looks like a sync or h.frequency issue,possibly even video ground
-
Thanks grantspain I will see if i can get a bigger pic up.
-
I dont know if this will be any bigger. I hope.
-
it looks like video ground problem
-
bad ground or bad sync connection. the jamma harness where it plugs onto the board is notorious for getting dirty intermittent contact. take it off and rub the "fingers" with a pencil eraser.
could also possibly be a dirty horizontal pot (either hold or position)
try cycling the adjustment back and forth a dozen or so times and see if it smartens up.