Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: greggooch on November 22, 2015, 10:45:56 am

Title: PACLED64 and LEDBlinky Cabinet Lighting
Post by: greggooch on November 22, 2015, 10:45:56 am

Hi guys, I am trying to use a dedicated PACLED64 with LEDBlinky for cabinet LEDs and I'm having some trouble.  I'm using 5050 strip RGB LEDs and I can only get the red LED to light for some reason.

I've tried different brands of strips (3M and a Chinese no-name), I've tried different pins on the PACLED64 board, fresh wires & connectors, cutting the strip down to about 12-18" long, but nothing.

Thanks in advance!

Title: Re: PACLED64 and LEDBlinky Cabinet Lighting
Post by: MydknyteStyrm on November 25, 2015, 08:34:14 pm

I have a third PACLED64 used for cabinet lighting, so I might be of some help. Do you have a pic of your wiring? If the Red is lighting only, are the green and blue wires in their respective ports?

Title: Re: PACLED64 and LEDBlinky Cabinet Lighting
Post by: greggooch on November 27, 2015, 10:45:38 am

Here's a drawing I hope will help.