Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: fablog on November 09, 2015, 09:48:29 pm
-
Hi guys,
What do you think about this control panel. I used the sega player 1 and player 2 layouts.
Thanks for any advice :D
-
looks pretty good to me. the only thing i'd be concerned about is the player 1 button 6 looks pretty close to the trackball. If i did the conversions properly, it looks like there may only be a few mm between the trackball housing and the button nut. I'd just double check to make sure there is enough clearance there.
-
What are your plans for admin buttons?
I assume since there are only two shown that they are P1 + P2 Start, with the rest (Coin 1, Coin 2, Exit, Pause, etc.) handled with shifted functions (http://newwiki.arcadecontrols.com/index.php?title=FAQ#Number_of_admin_buttons) and/or a coin door.
Scott
-
Severdhed: My friend Paulo made me this plan in 3D, including the U-trak, to check the clearance with the pushbutton and it's OK. But I didn't think to check the clearance with the button nut. Should be OK but better to be sure, I'll let you know. Thanks.
PL1: you assumed correctly :) I don't want too many buttons in the CP.
-
I built several control panel tops to test.
I found the player 2 layout to be more comfortable for both players.
-
Badmouth: Thanks for the advice. I will give it a try. It could be better for the aesthetic too.