Build Your Own Arcade Controls Forum

Main => Artwork => Topic started by: BAMBOO on October 23, 2015, 10:18:58 am

Title: Dynamo Cut-Corner Template
Post by: BAMBOO on October 23, 2015, 10:18:58 am

Made this a little while back, hope someone can use it.  I believe it is the HS-5, cause that is what I have and I took all the measurements from my CPO.  300 dpi.  ;)
Download: http://www.mediafire.com/download/o62k463grilov38/DYNAMO-CORNER-CUT-CORNER-HS5-CPO-2TEMPLATE.png (http://www.mediafire.com/download/e1kuhsm1exv21wb/DYNAMO-CORNER-CUT-CORNER-HS5-CPO-TEMPLATE.png)

(http://www.mediafire.com/convkey/fc94/o62k463grilov38zg.jpg)

Title: Re: Dynamo Cut-Corner Template
Post by: harveybirdman on October 23, 2015, 10:25:15 am

Pretty sure that Dynamo's and my 3KOAM panels are different dimensions, but I'm going to take a look at this anyway.

Thanks.

Title: Re: Dynamo Cut-Corner Template
Post by: BAMBOO on October 23, 2015, 10:32:25 am

Quote from: harveybirdman on October 23, 2015, 10:25:15 am

Pretty sure that Dynamo's and my 3KOAM panels are different dimensions, but I'm going to take a look at this anyway.

Thanks.

I can go back and list the measurements then repost.  Might take me a little while cause I'm so busy at the moment but I should have included them.

Title: Re: Dynamo Cut-Corner Template
Post by: BAMBOO on October 23, 2015, 12:01:24 pm

(http://www.mediafire.com/convkey/363f/c1n9mlcup3r8599zg.jpg)

Title: Re: Dynamo Cut-Corner Template
Post by: harveybirdman on October 23, 2015, 12:15:23 pm

Thanks, that's actually pretty close to mine, I'll have to measure when I get home.

Title: Re: Dynamo Cut-Corner Template
Post by: BAMBOO on October 23, 2015, 01:35:31 pm

Yep....   ;)

Title: Re: Dynamo Cut-Corner Template
Post by: opt2not on October 23, 2015, 04:55:17 pm

Coooooool. thanks for this, might come in handy.  :cheers:

Title: Re: Dynamo Cut-Corner Template
Post by: BAMBOO on October 23, 2015, 06:00:44 pm

Yep, wish I would have posted it sooner.  Just needed a break from my arcade hobby for a while.  You guys think I should measure the cab itself or has that already been done?  I read somewhere last year a whole thread about the Dynamo cab dimensions.... or lack of...