Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: 800screws on October 05, 2015, 10:41:40 am

Title: Atomiswave/game king split cab...closer but new problems
Post by: 800screws on October 05, 2015, 10:41:40 am

Ok.  I have the cab with the two boards using a 2 in 1 board splitter.  Both boards r running vga into the splitter.   Coming out I'm using the jamma wiring into a cga to vga converter so I can move the picture around on the monitor.   Atomiswave is having the correct picture but when I switch the board to game King it scrambles on the monitor then says no signal.  I don't know what's going on because the atomiswave is running vga the same way the game King is? Any ideas?