Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: Joselv81 on October 04, 2015, 03:43:56 am
-
Well first off great to be a part of the community. Well it has been a rough week, just got a cabinet that included x-arcade joystick and buttons thats good I guess. Had some troublw getting the connections right but finally got it. Now my issue is that I setup a vga cable to my monitor after using a jamma adapter and had issues with the monitor I was thinking that was the problem. Turns out it wasn't the monitor would not hold sync all the time. I tried changing it to vga it works better i would say but now the issue is that I see three of my drsktops and they all look terrible. I am thinking it might be a horizontal issue but don't want to mess with it too much as I am not very experienced. If anyone had had this issue and got it fixed or has any input please let me know, I am to the point of taking the darn thing out and putting in a lcd but that might be too small. TIA
Update: Well I think I have the 15khz installed correctly now I had two displays and then boom back to three so I know I am doing something right. Here are some of my specs of anyone can help I am running a Nvidia g210 with Windows 7 x64 have soft15khz but at times gives me a runtime error 13 I've tried arcadeosd but to no avail cant seem to understand Powerstrip either. Really any help would be appreciated thanks again.
-
You DO feed it with a 15kHz Signal? - It won't work with a plain VGA Signal.
-
Well i am trying to setup powerstrip and soft15k but soft gives me runtime error 13 and powestrip can really get into it ahould i try and install a second monitor first?