Build Your Own Arcade Controls Forum
Arcade Collecting => Restorations & repair => Topic started by: Jollywest on September 12, 2015, 03:01:54 am
-
Over the last couple of months I've been fixing up an old BAS cab. It wasn't much more than a shell when I got it but the cab itself was in pretty good nick. The side-art and coin doors were in decent condition as well, but the base was pretty tatty.
Here's some pics;
(http://s6.postimg.org/ifvj60d35/image.jpg)
(http://s6.postimg.org/oztpym1q9/image.jpg)
(http://s6.postimg.org/9i67uwv9d/image.jpg)
(http://s6.postimg.org/dihykwb41/image.jpg)
(http://s6.postimg.org/e9aoqodhd/image.jpg)
Base removed and new base constructed, with extra castors on front to make it easier to move about;
(http://s6.postimg.org/6cq7ig20x/image.jpg)
(http://s6.postimg.org/ai144czsx/image.jpg)
(http://s6.postimg.org/u2fn750e9/image.jpg)
New ribbed rubber matting fitted;
(http://s6.postimg.org/tflbvcsw1/image.jpg)
The finished article;
(http://s6.postimg.org/yynvckpxd/image.jpg)
(http://s6.postimg.org/5uzngc1tt/image.jpg)
(http://s6.postimg.org/opqst0cht/image.jpg)
(http://s6.postimg.org/4aubhxtfl/image.jpg)
(http://s6.postimg.org/xh2f10l6p/image.jpg)
(http://s6.postimg.org/e3ph0saip/Picture_046.jpg)
It works;
(http://s6.postimg.org/qcg0e8ojl/image.jpg)
The board in it was just for testing and has a GFX fault, I've just received a Pandora's Box 3 mutli-game board though so that's in there now :)
Here's a vid;
http://youtu.be/-_Rlqy1W8lU (http://youtu.be/-_Rlqy1W8lU)
Big thanks to Arcade Art Shop (UK) for printing the Marquee & CPO artwork :applaud: