Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Rockotaco79 on September 05, 2015, 04:39:20 pm

Title: (Solved) need help getting into the iCade 60 in 1 settings menu.
Post by: Rockotaco79 on September 05, 2015, 04:39:20 pm

Hi guys, I'm having a little party tonight and I'm hoping someone might be able to help. My apologies that I posted this in the general section, but I'm hoping to get some quick help if possible.

Bought a new 60 in 1 iCade board for my multicade cocktail, it previously had a 9 in 1 board. Well everything works but I can't get into the settings menu to change games to cocktail mode. It is very frustrating, none of the buttons will advance to the next screen. This is a 1 button (and 1+2 player buttons) setup per side. It says S2:Next when I boot in test mode, but I cannot get to the next screen. It's driving me crazy! Any help would be very much appreciated. Thank you guys!!!

Title: Re: Desperately need help getting into the iCade 60 in 1 settings menu.
Post by: Rockotaco79 on September 05, 2015, 04:57:07 pm

Guessing I don't even have a SW2 button wired up on this thing? Ugh. :( can I use an existing button as SW2 or is it a pain to move the wire to that spot on the harness.

Title: Re: Desperately need help getting into the iCade 60 in 1 settings menu.
Post by: Rockotaco79 on September 05, 2015, 06:03:29 pm

Fixed! Wired up player 2 switch to spot 23 on the harness, bingo! If I need to I will put the switch back in place once I get the settings correct. Done and done. Thank you me lol.