Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: rock145 on August 28, 2015, 04:39:13 pm

Title: vga arcade monitor power plug
Post by: rock145 on August 28, 2015, 04:39:13 pm

I just got 19'' vga arcade monitor and it have a power plug but there is not connection to an wall outlet. Please take a look at the picture below and tell me what I need to buy. On the chasis it says Song U Evo 94.

(http://s5.postimg.org/ll4kawbwz/100_0275.jpg) (http://postimg.org/image/ll4kawbwz/)

Title: Re: vga arcade monitor power plug
Post by: grantspain on August 29, 2015, 05:10:46 am

is there a model number on the monitor,it looks like its from a megatouch machine-possibly a ducksan or tatung

Title: Re: vga arcade monitor power plug
Post by: rock145 on August 29, 2015, 02:57:14 pm

Thanks, for the reply. I got a hold of the seller and he said he was going to sent me the cable.

Title: Re: vga arcade monitor power plug
Post by: yotsuya on August 29, 2015, 04:55:38 pm

Quote from: rock145 on August 29, 2015, 02:57:14 pm

Thanks, for the reply. I got a hold of the seller and he said he was going to sent me the cable.

Does that monitor have a built in Isolation transformer?

Title: Re: vga arcade monitor power plug
Post by: rock145 on August 30, 2015, 04:33:47 pm

I don't know much about arcade monitors. What is an Isolation transformer?

Title: Re: vga arcade monitor power plug
Post by: rock145 on August 31, 2015, 05:29:46 pm

I found out the model number tatung VS-20475 120v-1a 60hz. When I receive the cord and if it works what is the maximum resolution on this monitor.

Title: Re: vga arcade monitor power plug
Post by: rock145 on September 07, 2015, 02:49:27 pm

Got the cable from the seller. Upon turn it on the picture was washed and very blurry and had horizontal green lines on the monitor. I was pretty worry and search online and discover that I need to play with the focus and bright nod on the monitor and it fixed the problem. I tried groovymame and the picture looked good. But I just order slg 3000 
so that it would look better.