Build Your Own Arcade Controls Forum

Software Support => GroovyMAME => Topic started by: axys on August 27, 2015, 06:20:22 am

Title: Boot problem after hdd install
Post by: axys on August 27, 2015, 06:20:22 am

Hello,

I'm trying to install GroovyArcade-Arch2015.02.15-x86_64, from an usb key, following this tutorial: https://code.google.com/p/groovyarcade/wiki/GroovyArcade_Install_Config_Guide (https://code.google.com/p/groovyarcade/wiki/GroovyArcade_Install_Config_Guide).
During the install, I delete all partitions of the hdd, then auto install.

The problem is that after the reboot, the pc won't boot: "Insert valid boot drive..."

I suspect an UEFI problem (legacy/UEFI is enabled (instead of UEFI)). I have installed a Debian distribution without problem.

Any idea about this problem ?

Sorry about my bad English  :-[

Title: Re: Boot problem after hdd install
Post by: axys on August 28, 2015, 12:21:05 pm

After many tries, the problem is the motherboard. The UEFI is very bugged.
I found an USB key compatible with the board. Auto install works well with it.  :D

Thanks for the distrib.