Build Your Own Arcade Controls Forum

Main => Consoles => Topic started by: danny_galaga on August 14, 2015, 07:47:28 pm

Title: Dumb Guncon 45 question
Post by: danny_galaga on August 14, 2015, 07:47:28 pm

I have two guncon 45s. How do I connect both up to a Playstation 1? My first thought is that maybe the signal connectors piggyback off each other, but that sounds dodgy...

Title: Re: Dumb Guncon 45 question
Post by: Malenko on August 15, 2015, 09:00:33 am

the yellow wire from each gun feeds into a T , then the T feeds the TV the signal.

If you dont have the stock wiring, you can use 2 of these:
http://www.monoprice.com/Product?c_id=102&cp_id=10218&cs_id=1021803&p_id=663&seq=1&format=2 (http://www.monoprice.com/Product?c_id=102&cp_id=10218&cs_id=1021803&p_id=663&seq=1&format=2)

1 to connect the 2 guns to 1 wire, the other to merge the combined gun signals to the playstation's yellow out, and plug that in the TV.

Title: Re: Dumb Guncon 45 question
Post by: danny_galaga on August 17, 2015, 04:30:27 am

Yeah, I have this connector. This is my problem  :-\

(cable in my hand is the original AV cable, and the grey part in between that and the console is from the gun)