Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: SpatzST on June 30, 2015, 11:36:15 am
-
http://www.microcenter.com/product/434815/Envy_700-215xt_Desktop_Computer?ob=1 (http://www.microcenter.com/product/434815/Envy_700-215xt_Desktop_Computer?ob=1)
I know I have seen several forum posts on PC specs to run mame but I searched for awhile and I couldn't find any.
Anyhow, I would be running Mame, S/NES, Genesis, probably a handful of Dreamcast, Street Fighter IV (the Steam game).
If that PC isn't adequate, what is it lacking?
also, I would get the open box one, which is about $400. Would it be more cost effective to build one myself? I was just worried that the power supply is kind of low, and the gfx card is probably not that great.
thanks
-
It's more than good ;)
-
That thing should be able to run pretty much anything without even breaking a sweat.
-
Cheaper to buy this than make my own most likely?
-
I've built cheap PC with:
Proc: Pentium G3258 (overclocked to 4,2)
board: Asus H81M-E
ram: Kingston Value 2048 Mb DDR3
graphics: Asus Radeon 4350
PSU: FSP 400 W (that's more than enough for this PC)
case: cheap and small SilentiumPC
HDD: Seagate 500 Gb SATA 3
and that's very good configuration for MAME, Taito Type X games.
-
That PC isn't lacking anything. It's almost overkill. But it's nice to have a PC that loads fast.
-
I've built cheap PC with:
Proc: Pentium G3258 (overclocked to 4,2)
board: Asus H81M-E
ram: Kingston Value 2048 Mb DDR3
graphics: Asus Radeon 4350
PSU: FSP 400 W (that's more than enough for this PC)
case: cheap and small SilentiumPC
HDD: Seagate 500 Gb SATA 3
and that's very good configuration for MAME, Taito Type X games.
how much did something like that cost you?
-
1000 zl so about 270 USD here in Poland.