Build Your Own Arcade Controls Forum

Arcade Collecting => Restorations & repair => Topic started by: vainbatchelor42 on June 21, 2015, 08:52:08 pm

Title: Restoring vs super mario bros
Post by: vainbatchelor42 on June 21, 2015, 08:52:08 pm

Finally got everything fixed now the sound is humming awfully.  Plz someone help. Signed noob

Sent from my SM-G900V using Tapatalk

Title: Restoring
Post by: vainbatchelor42 on June 21, 2015, 10:35:53 pm

I've been working on a vs super mario brother's.  Put a few fuses in and cleaned up caked up power supply  . And it worked!!! Had lines in screen adjusted that a little fixed for the most part. But now the sound is humming awfully.  Tried to pull the tiny adjustment board. The board looked good no solder traces so now I'm stumped. Someone plz help. Plus I'm bidding on a 60 in one not sure how to connect but hopefully I'll figure it out

Sent from my SM-G900V using Tapatalk

Title: Here's what I'm dealing with
Post by: vainbatchelor42 on June 21, 2015, 11:12:00 pm

(http://images.tapatalk-cdn.com/15/06/21/d0d72cc16d1143fe214b23263f5fdd09.jpg)

Sent from my SM-G900V using Tapatalk

Title: Re: Here's what I'm dealing with
Post by: vainbatchelor42 on June 21, 2015, 11:13:53 pm

More photos

Sent from my SM-G900V using Tapatalk

Title: Re: Restoring vs super mario bros
Post by: pbj on June 22, 2015, 10:23:19 am

Do a cap kit on the sound amp.

Title: Re: Restoring vs super mario bros
Post by: vainbatchelor42 on June 23, 2015, 01:07:54 am

Quote from: vainbatchelor42 on June 21, 2015, 10:35:53 pm

I've been working on a vs super mario brother's.  Put a few fuses in and cleaned up caked up power supply  . And it worked!!! Had lines in screen adjusted that a little fixed for the most part. But now the sound is humming awfully.  Tried to pull the tiny adjustment board. The board looked good no solder traces so now I'm stumped. Someone plz help. Plus I'm bidding on a 60 in one not sure how to connect but hopefully I'll figure it out

Sent from my SM-G900V using Tapatalk

Will this work in my cab? Any help would be greatly appreciated.  Signed :HELP!!

Sent from my SM-G900V using Tapatalk

Title: Re: Restoring vs super mario bros
Post by: yotsuya on June 23, 2015, 10:21:38 am

Quote from: vainbatchelor42 on June 23, 2015, 01:07:54 am

Quote from: vainbatchelor42 on June 21, 2015, 10:35:53 pm

I've been working on a vs super mario brother's.  Put a few fuses in and cleaned up caked up power supply  . And it worked!!! Had lines in screen adjusted that a little fixed for the most part. But now the sound is humming awfully.  Tried to pull the tiny adjustment board. The board looked good no solder traces so now I'm stumped. Someone plz help. Plus I'm bidding on a 60 in one not sure how to connect but hopefully I'll figure it out

Sent from my SM-G900V using Tapatalk

Will this work in my cab? Any help would be greatly appreciated.  Signed :HELP!!

Sent from my SM-G900V using Tapatalk

Didn't I already answer this question for you in another thread? No, it's not going to work without rewiring the cab and rotating the monitor. Plus, Super Mario Brothers isn't even on that board.

Title: Re: Restoring vs super mario bros
Post by: vainbatchelor42 on June 23, 2015, 03:51:35 pm

I'm pretty sure I can rewire it. I just need the right harness.  With the right cable. Don't know the name of correct cable . And a wiring diagram would b a plus. Signed: noob

Sent from my SM-G900V using Tapatalk

Title: Re: Restoring vs super mario bros
Post by: yotsuya on June 23, 2015, 03:56:20 pm

Good luck with your project.