Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: behrmr on June 19, 2015, 11:40:49 am
-
I am selling off parts I no longer need. All are working. All prices are shipped to US48
GBS8100 Vga to Cga Pal Ntsc Converter: $30
https://dl.dropboxusercontent.com/u/25872484/GBS8100.jpg
GBS8220 CGA/EGA/YUV to VGA Converter: $30
https://dl.dropboxusercontent.com/u/25872484/gbs8220-2.jpg
WEIYA CV-04 RGB to NTSC/PAL TV Converter: $30
https://dl.dropboxusercontent.com/u/25872484/WEIYA%20CV-04.jpg
Mini ITX form Factor MAME PC: $175
This is a windows 7 based PC with MAME v0.0154b compiled with "no-nag". The front-end is a nice and simple installation of AdvanceMeu which is setup for tiled previews. Had onboard VGA. Has run every 80's classic game I have tried fine. Comes with an ipac wired to a JAMMA edge connector for 3 buttons, P1+P2 start, and joystick. Also has an audio jack wired to the JAMMA harness to plug into your PC's sound card. It has a USB plug wired to the +5V of the JAMMA harness in case you want to run +5V into your JAMMA rig to run coin door lights or marquee bulbs of the PC's power supply.
Here's is a bad pic of it running. https://dl.dropboxusercontent.com/u/25872484/mame%20pc%20fe.jpg
Specs:
ADB2550B-ITX
2GB RAM
Windows 7
60GB SSD Hard Drive
IPAC
JAMMA edge connector/wiring harness
Audio jack for your PC
+5V USB adapter to power your JAMMA rig if needed
On board VGA
Pico PSU
https://dl.dropboxusercontent.com/u/25872484/mame%20pc%20%281%29.jpg
https://dl.dropboxusercontent.com/u/25872484/mame%20pc%20%282%29.jpg
https://dl.dropboxusercontent.com/u/25872484/mame%20pc%20%283%29.jpg
GBS8220 CGA/EGA/YUV to VGA Converter: $30
https://dl.dropboxusercontent.com/u/25872484/GBS8220.jpg
JPAC - brand new never used: $55
https://dl.dropboxusercontent.com/u/25872484/JPAC.jpg
PM Me for more details.
-
PM sent on the GBS8220 CGA/EGA/YUV to VGA Converter.
-
GBS 8220 sold!
-
Found another GBS8220. Updated main listing.
-
Happy Father's Day. Buy your Dad some parts!