Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: southpaw13 on June 06, 2015, 02:47:01 pm

Title: Punch Out cabinet plans.
Post by: southpaw13 on June 06, 2015, 02:47:01 pm

Anyone have cabinet plans/dimensions or can you point me in the right direction?  Want to build one from scratch to play Punch Out, Super, Armwestling and Playchoice 10.   I already have a Donkey Kong....how much different is it????


Thanks!
SP

Title: Re: Punch Out cabinet plans.
Post by: ChanceKJ on June 06, 2015, 04:12:22 pm

Quite a bit diffrent. Similar ideas and design, but still quite different.  Here i found these images on google.

(http://i1172.photobucket.com/albums/r564/worldofnintendo/10001293_717898554929674_935766910_n_zps72654964.jpg)

(http://www.superbowen.com/dan/108.jpg)

(http://www.johnsarcade.com/images/punchout1.jpg)

I'd maybe check out the John's Arcade website. he's got a ton of pictures from his collection you could use for reference.
http://www.johnsarcade.com/my_video_arcade_collection.php (http://www.johnsarcade.com/my_video_arcade_collection.php)

Title: Re: Punch Out cabinet plans.
Post by: southpaw13 on June 06, 2015, 04:24:17 pm

That's a great start!!!  If I can find a straight on pic of the side then I can overlap my Donkey Kong to it and figure out most measurements.  Here is one pic that might help.

http://www.johnsarcade.com/punch_out_restore_album/Images/100.jpg (http://www.johnsarcade.com/punch_out_restore_album/Images/100.jpg)

And just one measurement of the height would be great!!!

Thanks for your help!!!

Title: Re: Punch Out cabinet plans.
Post by: Yenome on June 06, 2015, 05:04:33 pm

looks like the main monitor is angled a lil while the second looks horizontal. or 10 degree angle. I played on one recently at weiners and losers in winston-salem, nc scott there has about 40ish games from 1970-1984. punch out included

Title: Re: Punch Out cabinet plans.
Post by: southpaw13 on June 07, 2015, 12:05:40 pm

Thanks for your help😀. Anyone got the actual height of a punch out??

Title: Re: Punch Out cabinet plans.
Post by: southpaw13 on June 07, 2015, 12:30:42 pm

Found this----now just need an accurate height from someone 😀

Title: Re: Punch Out cabinet plans.
Post by: ChanceKJ on June 07, 2015, 01:39:08 pm

Not sure how accurate this is, but its worth a shot...

https://3dwarehouse.sketchup.com/model.html?id=21758793e5d42201f9b4d9c4764ac69a (https://3dwarehouse.sketchup.com/model.html?id=21758793e5d42201f9b4d9c4764ac69a)