Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: sim_v on May 25, 2015, 04:29:39 pm

Title: Need help for lock door system of Rowe Ami
Post by: sim_v on May 25, 2015, 04:29:39 pm

Hi,

Previous owner remove all lock system from front door. He got Juke Box without key.
I have a good idea how putting springs, lock, brackets, etc. But I have no idea about 2 metal bars of the second picture...

On the first picture, I just put lock left&right, they are in wrong direction, no spring attached.

Thank for your help,
-Simon-

Title: Re: Need help for lock door system of Rowe Ami
Post by: ami-man on May 26, 2015, 11:50:09 am

Hi Simon,

The springs on the locking mechanism are attached to the left & right of the right of the sliding mechanisms by a small right angled clip with a small hole in for the spring the sliding sections are screwed down through collars that allow the sliding sections to move/

The metal parts in picture 2 are for locking down the mechanism for transit.

If you are short on the parts such as the collars, screws and spring brackets send me PM to purchase them.

Regards
Alan

Alan Hood
ami-man
UK

Title: Re: Need help for lock door system of Rowe Ami
Post by: sim_v on May 26, 2015, 02:42:47 pm

Thanks a lot Ami-Man !
 :notworthy: :notworthy: :notworthy: