Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: lostboy4480 on May 04, 2015, 09:51:22 pm
-
I am in the process of rebuilding a PGA Tour Cabinet, I have finished the Computer part so now it's onto the monitor. This is something new to me but I want to learn as much as I can.
When I first turned it on, There was nothing on the display.. I could hear the static build on the screen but thats it. I then found if I turn the Screen adjustment on the flyback I could get the following.
(http://i.imgur.com/mWOVQdo.jpg)
Is this vertical collapse ?
If I go a little further with the screen adjustment after this it all goes blank again.
Should I do a cap kit ? new flyback ? any advise on where to start would be greatly appreciated.
I have enclosed a few more pics if that helps. It looks like it has had some of the caps replaced.
(http://i.imgur.com/M0sd9Uv.jpg)
(http://i.imgur.com/vHJYy0a.jpg)
-
i would be looking at vertical deflection circuit,kortek are well known for ic,resistors and caps in v.def circuit dying
i would not rule out an issue in the deflection yoke itself
-
Thank you, That will give me something to start on :)