Build Your Own Arcade Controls Forum

Front End Support => Maximus Arcade => Topic started by: bobglob on April 30, 2015, 03:27:57 pm

Title: LED BLINKY HELP ON ARCADE MAXIMUS - SUPER NOOB QUESTION
Post by: bobglob on April 30, 2015, 03:27:57 pm

Hi guys,

I need help with LED Blinky.  My front end loader is arcade maximus.

I have mapped all the controls properly in the LED Input map(I think).  They light up properly in that tool.
They also all light up properly in the LED Blinky simple LED Test.  So the lights are working.

I've gone into the LED Blinky Config and the LED Blinky Controls Editor and I did them to the best of my lame ass ability.

But I get no lights at all.  And no error message.  And trouble shooting doesn't help me at all.

Help. 

Thanks in advance for your assistance.  This is my most desperate hour.

Title: Re: LED BLINKY HELP ON ARCADE MAXIMUS - SUPER NOOB QUESTION
Post by: arzoo on May 01, 2015, 10:39:26 pm

bobglob - you mentioned that your MA config does not have the tab for the LEDWiz configuration. MA is not configured correctly to use the LEDWiz and LEDBlinky. That's why nothing is lighting up. This page might help:
http://blog.xgaming.com/how-to-setup-configure-maximus-arcade (http://blog.xgaming.com/how-to-setup-configure-maximus-arcade)