Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: bsong on April 12, 2015, 05:09:36 pm

Title: Wiring LED WIZ
Post by: bsong on April 12, 2015, 05:09:36 pm

i know this topic has been brought up several times but cant seem to find a right answer to a few questions

i have 2 LEDWIZ boards and im going to be using the PC power supply to light up my helio9 LED's. Im going to be using a terminal block to daisy chain all the 5v from the buttons and the led wiz to the power supply.  Is it possible to put the line from each of the different LEDWIZ boards into 1 port on the terminal block.  If i do that do i need to use the bank voltage select for all the ports and then daisy chain those back to the terminal board

Title: Re: Wiring LED WIZ
Post by: Nephasth on April 12, 2015, 05:12:49 pm

Read the instructions!

Title: Re: Wiring LED WIZ
Post by: bsong on April 12, 2015, 06:02:21 pm

on which part