Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: skodkassen on March 28, 2015, 02:39:55 pm

Title: Complimentary colours on illuminated ball tops and reverse intensity.
Post by: skodkassen on March 28, 2015, 02:39:55 pm

Hi there.

I have a mame cabinet for which I have bought illuminated pushbuttons and balltops for the sticks. I have this annoying problem that I have complimentary colours on the leds in the balltops, meaning red is cyan, green is magenta and blue is yellow. All the pushbuttons have the correct colours. I have wired them all to my ipac ultimate I/O in the same way. When I use the LED Blinky simple test I also notice that full intensity lights all the pushbuttons, but not the balltops and no intensity lights the balltops, but not the pushbuttons.

What can the problem be? It annoys the heck out of me.

Please help me if you can.

Title: Re: Complimentary colours on illuminated ball tops and reverse intensity.
Post by: skodkassen on March 30, 2015, 06:18:22 pm

Once again I solved the problem from another source. You need to uncheck the enable high-current outputs in WinIpac2.