Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: kevincfla on March 27, 2015, 11:37:47 am
-
Hello All!
I just got a golden tee complete. When i turn it on i get no signal on monitor. Green board, status 1 is solid green status 2 is blinking green next to 2 solid red leds. I tried a new power supply and hard drive and nothing. Im guessing i need a new green board?
Thanks!
Kevin
-
here is a bit of help
Now for the led's like i said there is 3 of them
staus 1 status 2 ide
status 1 and 2 MUST blink at all time's
red led (ide) will blink when the ide interface is getting polled
at boot the red ide led will blink once
then the post boot load's,then u will see it blink serval time's >game-loading<
so in short the "board" passed all of it's chk-sum's
Now if the green status led 2 dose not "flash"?
make sure u53 is good and in the right way,try to have a good spare on hand
any build will do (golden tee/buck hunter) any u53...for now
i have never seen the rs232 stop this,but the bat back-up will
this why i remove them for testing
status light 1 dose not flash u have problem's with
the ide interface chip u2/u15/u26
as these chips are tied to the main bus and they are polled first
they will cause a "lock-up" of the board ie :staus1: not blinking
the audio and vidoes are on status #2
so they are not the problem
as status 1 led and the ide interface are problem childern
i will put them in chapter #3
this will inculde the "special switch setting's" NOTE THESE ARE FOR BOARD TEST OLNY
AND MUST BE RETURNED TO THERE NORMAL STATE FOR PROPER GAME USE
ed
-
Thank you Ed for the reply! Is there anybody here on the forum that can fix this for me?
Kevin
-
believe me it is easier to exchange it out
I do them all the time
pm if u want
ed
-
Pm sent!
-
Where is my board Ed? You cashed my check! I called you, sent you numerous e-mails the last 2 weeks with no response! If you dont respond soon i will notify the admin here. Been almost 2 months! B.S.!
-
dearie me :-o
-
Kevin
if u would care to read your e-mail
u would find out i was/am laid up sick
2 week's in the hosiptial will do that for u .
take it or leave it
i make no sorry's for it
ed
-
Still nothing.
-
12/22/2015- still no board, hard drive and out 150.00
-
Wow.
Kevincfla, you mailed him a check, so you must have his address.
While it may be tempting to pay him a visit and put him in the hospital for real, the right thing to do would be to inform the police.
Mail fraud is a very serious (federal) crime.
-
2/12/2016.......Nothing! Going to post on bad traders list with all the email exchanges we had. I have his address jamesbeat. I still have the copy of the shipping label. Dont know what criminally i can do since he lives in Canada. There are a few members that play at the golf course i work at so i will ask them.
-
kevin u will stay without a board,
until u resolve the fact 150.00 to repair dose not mean 150.00 to repair and i pay shipping both way's......
u were called by me on this matter..RIGHT ON THE POHONE.
your reply "quote un-quote" the !!chk is in the package!!
fourcing me to pay 123.56 shipping to up's to get same said pkg.
YOU were told ship via USPS
now
i do not know what part of the upper statment u missed ??
ed