Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: coyo5050 on March 21, 2015, 01:17:43 am
-
I am having trouble finding out the height or amount of space a trackball needs inside a control panel. I have looked up a couple that are for sale and I dont see any dimensions. I dont have a lot of space vertically in my CP but would like to see if it is something I can add to it (my CP is set up to be able to swap out for different controls). Anyone know of any "slim" ones?
Thank you
-
I found some measurements for you below. Looks like Ultimarc is your best bet at only 2" vertically.
Ultimarc's U-Track: http://ultimarc.com/trackball.html (http://ultimarc.com/trackball.html)
(http://ultimarc.com/images/tb_diag.jpg)
Happ 3" Trackball: http://na.suzohapp.com/amusement_products/trackballs/56-0100-11HL (http://na.suzohapp.com/amusement_products/trackballs/56-0100-11HL)
(http://na.suzohapp.com/images/50/560100xxmount.gif)
Happ 2.25" Trackball: http://na.suzohapp.com/amusement_products/trackballs/56-5500-11 (http://na.suzohapp.com/amusement_products/trackballs/56-5500-11)
(http://na.suzohapp.com/images/50/565500xx_mountingnew.gif)
DeLuSioNaL29
-
I must be blind i didnt even see those nice measurement pics. Thanks for posting them! The 2" may be workable. If i could find something a quarter inch shorter that would be perfect
-
I must be blind i didnt even see those nice measurement pics. Thanks for posting them! The 2" may be workable. If i could find something a quarter inch shorter that would be perfect
belt sander!
-
Another option if you want a 3" ball. http://na.suzohapp.com/amusement_products/trackballs/56-0110-11 (http://na.suzohapp.com/amusement_products/trackballs/56-0110-11)
Drawings under more info tab.
good day.