Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: frankie M on March 10, 2015, 06:06:26 pm

Title: rowe ami r90 error 39 or 38
Post by: frankie M on March 10, 2015, 06:06:26 pm

Hi
I recently bought a R90. It did work bur has now stopped selecting. The turntable turns. I can make carousel turn with switches. i have metered out all connections ok. Power supply of and i think all motors are.

any help please?

Frankie M

Title: Re: rowe ami r90 error 39 or 38
Post by: ami-man on March 11, 2015, 11:15:05 am

Hello Frankie,

The two errors you quote both refer to issues with the inner cam switch, both of these error will shut the jukebox down until it has been turned off and back on again.

If you have just got this jukebox check for stupid things like the two smicro switches on the transfer motor (cam switches) these are fitted with un-insulated spades and if you have moved the mechanism out of the jukebox the ends of the spades could be shorting the switches out, so check to see that none of the connection are touching.

Check the mechanism connection pins for dry joints (cold joints USA).

Please let us know how you get on.

Regards
Alan

Alan Hood
ami-man
UK

Title: Re: rowe ami r90 error 39 or 38
Post by: frankie M on March 12, 2015, 03:23:36 pm

Hi Alan

Ive metered out the switches working fine. I metered out the pin from mech control board to main board ok (with loom attached). Any ideas?

Funny thing is it worked (but wrong selections x3) and then just packed up.

Cheers

Frankie