Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Richardgregory on February 21, 2015, 07:49:30 am

Title: Ultimarc U360 Template
Post by: Richardgregory on February 21, 2015, 07:49:30 am

Ok, I think I'm going to replace one of my Ultimarc MagStik with a U360 so that I can play Qbert properly.  But in doing so, I don't want to have to rebuild/modify my existing CP.  So the question is: does the U360 plate line up with the Magstik such that I don't have to make new holes?

I guess I could ask Andy in a PM.

Title: Re: Ultimarc U360 Template
Post by: lamprey on February 21, 2015, 12:56:53 pm

According to the Ultimarc website the mounting plates are slightly different.

Title: Re: Ultimarc U360 Template
Post by: dkersten on February 24, 2015, 06:46:50 pm

I don't know if it has changed, but the specs for the u360 that used to be up were wrong, the u360 uses the same plate as the j-stik, so go by that one.