Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: creesy on February 16, 2015, 03:08:36 am

Title: Ipac 2 (2015 USB) Not Recognized
Post by: creesy on February 16, 2015, 03:08:36 am

Was working fine then i reset the pc and nothing

Only Shows up in Device Manager as Uhid Firmware update but windows cant find a driver.

Tried disconnect every button and only having 1 button and 1 GND connected still nothing (not even a led light flash on plugging it in)

The only thing is windows recognizes it and tries to find a driver for that UHID Firmware update but cant.

At my wits end everything was working perfectly reset the computer and then nothing  :banghead: :banghead:

Title: Re: Ipac 2 (2015 USB) Not Recognized
Post by: Hoopz on February 16, 2015, 06:44:38 am

Remove the device (left click) under device manager and then plug it back in. 

Title: Re: Ipac 2 (2015 USB) Not Recognized
Post by: Hoopz on February 16, 2015, 07:09:58 am

I said left click but meant right click...

Title: Re: Ipac 2 (2015 USB) Not Recognized
Post by: creesy on February 16, 2015, 05:54:57 pm

Thanks for the reply i tried that for whatever reason it didnt work.

But i did resolve the issue.

Windows couldnt find the driver itself so i showed it where to find the drivers for the UHID (In the*\Winipac\drivers folder)  That got windows to recognise the board which for whatever reason seemed to have lost its firmware or was stuck in a firmware update mode,  I then flashed it with the latest firmware and it was all up and running.

Now to get back to the frustration that is setting up hyperspin :banghead: :dizzy: