Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Elbaid on February 15, 2015, 05:53:11 pm

Title: Sony PVM broadcast monitor
Post by: Elbaid on February 15, 2015, 05:53:11 pm

Any one with experience of Sony broadcast monitors? I have one en route and plan to use as an arcade/emulation monitor. Can I use a VGA-BNC cable while outputting 15khz or will I need a scart to BNC and use a UMSA card?

Thanks

Title: Re: Sony PVM broadcast monitor
Post by: ChocolateApple on February 18, 2015, 06:50:03 pm

I just wired the CGA signal into a set of BNC balun plugs. Worked great for me.

Title: Re: Sony PVM broadcast monitor
Post by: Elbaid on February 21, 2015, 10:49:16 am

Thanks for the heads up. I used a VGA to BNC with H/V sync combined to sync-in and it works great

Title: Re: Sony PVM broadcast monitor
Post by: crispux3 on February 24, 2015, 02:41:49 pm

What are you using to output the 15Khz signal? I have mine hooked up with DVI to BNC cables and use CRT_emudriver for the 15khz output.

Title: Re: Sony PVM broadcast monitor
Post by: Elbaid on February 28, 2015, 08:20:54 pm

same here, but I'm using a DVI to VGA adapter