Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Encryptedmind on February 09, 2015, 03:44:17 pm
-
Im new to this and was wondering if anyone had any ideas. I have a golden tee fore 05. with a green pcb board, hard drive and a 2.09 eprom. I want to upgrade it to a golden tee complete. What would I need to do that and if so where can I get this stuff.
Thanks in advance
-
Unfortunately, you can't get this service anymore. You would have to buy a complete board. You could always try calling Incredible Technologies and see what they say. :dunno
-
u will need u53
its-gamming no longer sell them
so flea-bay it is.. make sure of your country code
and build # ie the s/w on the harddrive
ed
-
What does the u53 chip do and where would I solder it on the board?
Another question someone is a selling a red pcb board with eagle 2.09 eprom. Can I just swap out the boards? He was saying something about they take different power supplies do you know what hes talking about? And would any golden tee complete hard drive work. Sorry for all the questions.
-
.
-
eagle 2.09 is the main boot rom.. for red or green board's
any it's gamming red or green board.
u53 is the security chip and the s/w on the hard drive must match
it's security #,country code, model
the red and green can inter change it is just the red board uses a atx style power supply
ed
-
If I got the u53 chip how would I program the hard drive to know the security number and what not? Would it be easier buying a compact flash drive they sell on eBay?
-
Encryptedmind
the person selling u the chip should know the
game build it came from
2004/5/6/compete etc
then they should know the country also
ed
-
Looked at my original board and it has the u53 chip on it I believe i could be wrong though. Its socketted and its right beside the u53 imprint on the board also theres a sticker on it saying G45-can-u.
Picture included
-
your Canada
at least that chip is
I will post u a Canada complete u53 # soon enough
ed
-
So is it possible to upgrade it to complete then? What would i need doing so?
Thanks Ed much appreciated
-
yes of course u can
let me get u the #'s
bear with me
ed
-
Hey Ed. Just wondering if you got those numbers for? Thanks
-
g4c-can-u =u53
on your board is 8 pin chip, this is a pic chip
u63 I believe it should be sb5 for complete
but I have seen some builds use sb4
ed
-
I have a u26 chip that says sb4 on it. Is that ok? If so what's the next step?
-
ya sb4 should be fine
it u run into a problem I have stock on sb5
ed
-
Sorry I don't know what the next step is. Do I just buy a golden tee complete hard drive and it should work or what?
-
if u are in Canada pm me
I will walk u through this
ed
-
PM you
-
if u are in Canada pm me
I will walk u through this
ed
Hi Ed,
I've been following your many posts on this subject. You seem to be the guy to talk to. I have a 2005 Extra Red Board that I am interested in upgrading to Complete. I understand I need to have the Complete HDD, 2.09 boot chip(U15), security chip (U53 G4C-US-U), and U61. First of all, is this correct? Second, if correct, where can I get theU53 and U61? the others I've got covered.
Thank you,
A
-
g4c-can-u =u53
on your board is 8 pin chip, this is a pic chip
u63 I believe it should be sb5 for complete
but I have seen some builds use sb4
ed
Hi Ed,
Do you still have any of the g4c-can-U chips left? I can't PM you as I am too new a member, but I expect you can send me a note - perhaps with an email address until my posting PMs is authorized. Trying to get a GT Complete running on a Canadian board...
Thanks!
John