Build Your Own Arcade Controls Forum
Main => Audio/Jukebox/MP3 Forum => Topic started by: ransome on January 11, 2015, 02:04:47 am
-
I just picked up a Rowe cd-100a jukebox for cheap . After plugging it in , it will play a cd track then pick up another . I think it is playing favorites ,it will never stop however . If I make a selection , it will play that selection then go back to playing what it wants. I tried the reset , how do I clear the memory on this box?
I own a manual but cant find where to clear memory. cdm12
-
After reading the manual more closely ,,,Looks like I just need to go into service mode , autoplay then clear programming .Ill try that tomorrow
-
I went in to the service mode . turned autoplay to off. Turned the jukebox to normal mode and it is still constantly playing , but any selection I make , it will play it . How do you do a master reset on this unit , maybe start from scratch
thanks Gregg
-
There is a clear selections option in the programming. If that does not work, try pulling the battery out of the CCC for a couple minutes (soldering may be required). When you reinstall the CCC and power on it should load the default configuration.
-
Hi
Thanks For the reply.
I ended up doing a full reset , that finally made it work like it should
Gregg