Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Blueic5 on January 06, 2015, 11:37:11 am

Title: Control Panel Buttons help!
Post by: Blueic5 on January 06, 2015, 11:37:11 am

Hi finally got round to putting my panel together with the U360 (ultimarc 360) , and the happ buttons from Ultimarc too..  Anyway the buttons sound really springy/boing  and im not sure if that's normal or ive done something wrong somewhere but its quite annoying some are ok but most sound like the spring is loose, any ideas?

Title: Re: Control Panel Buttons help!
Post by: thomas_surles on January 06, 2015, 01:36:53 pm

Check and make sure the springs aren't messed up. But other than that (from my experience) happ buttons are a little noisy.

Title: Re: Control Panel Buttons help!
Post by: Blueic5 on January 06, 2015, 01:43:21 pm

I'll check,  maybe I messed them up on install 

Title: Re: Control Panel Buttons help!
Post by: aldub516 on January 06, 2015, 01:47:12 pm

theres not really much to mess up on a pushbutton install. Some buttons are noisier than others. My happs have a decent spring sound to them.

Title: Re: Control Panel Buttons help!
Post by: yotsuya on January 06, 2015, 02:13:04 pm

Don't worry, the springs will ride up with wear.