Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: jasonbar on January 01, 2015, 01:46:14 am
-
Coin door shipped.
This is now also not needed. Would love a few bucks + shipping, if possible:
Coin bucket & bracket (which was previously attached to the cab with the bottom coin door frame bolt).
See later post for pics.
Thanks,
-Jason
Coin door up for grabs. Not the prettiest, but mostly there. Was on my MAME cab until I got a bigger door.
- painted w/ Rust-Oleum black hammered paint
- no mounting hardware
- no lock
- coin return flappy doors painted red
- no coin mechs
- "push to reject" buttons neutered, secured, & 5V jumbo LEDs attached behind them for backlighting
- project boxes modded to at as coin return cubbies--good for holding keys to nonexistent barrel lock
Would like to get a few bucks for it, but will donate if that's too optimistic.
Located in Pasadena, CA. Can ship.
Hi-res pics:
https://www.dropbox.com/sh/dtsaq0jwur8j90h/AADm8cRexh8AdV-qJwigSjMUa?dl=0 (https://www.dropbox.com/sh/dtsaq0jwur8j90h/AADm8cRexh8AdV-qJwigSjMUa?dl=0)
Thanks,
-Jason
-
Coin door up for grabs. Not the prettiest, but mostly there. Was on my MAME cab until I got a bigger door.
- painted w/ Rust-Oleum black hammered paint
- no mounting hardware
- no lock
- coin return flappy doors painted red
- no coin mechs
- "push to reject" buttons neutered, secured, & 5V jumbo LEDs attached behind them for backlighting
- project boxes modded to at as coin return cubbies--good for holding keys to nonexistent barrel lock
Would like to get a few bucks for it, but will donate if that's too optimistic.
Located in Pasadena, CA. Can ship.
Hi-res pics:
https://www.dropbox.com/sh/dtsaq0jwur8j90h/AADm8cRexh8AdV-qJwigSjMUa?dl=0 (https://www.dropbox.com/sh/dtsaq0jwur8j90h/AADm8cRexh8AdV-qJwigSjMUa?dl=0)
Thanks,
-Jason
I'll give you the cost of shipping it. PM me your Paypal address.
-
I'll give you the cost of shipping it. PM me your Paypal address.
Too slow. :P
-
Coin door assembly shipped.
Same story on this: seek some bucks but will settle for just shipping if I must.
Black plastic coin box & its steel bracket. Used but intact.
Hi-res gallery: https://www.dropbox.com/sh/egyusdft0xj881v/AADOrn6ya7dbHeWRajfDCqcua?dl=0 (https://www.dropbox.com/sh/egyusdft0xj881v/AADOrn6ya7dbHeWRajfDCqcua?dl=0)
-J
-
I am interested in the box, could you give me the measurements so I can make sure it will fit in my machine?
-
About 10" wide x 6" deep x 8" high.
Thanks,
-Jason
-
I think that might fit exactly, how much do you think shipped to San Dirgo 92139?
-
For reference, it's packaged up & the shipping box is 14"x10"x7", 3lb.
PM incoming regarding cost to ship to you, Shaybe.
Thanks,
-Jason
-
Shaybe's not buying at the moment. Per his blessing, this is still up for grabs.
Will bring to Arcade Expo & donate there if I don't get a taker in the next week.
Thanks,
-Jason
-
Forgot to bring to Arcade Expo. Just noticed it under my desk at work. Moving to the Free Items thread.
Thanks,
-Jason