Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: mwelgat24 on December 27, 2014, 09:57:11 pm

Title: need help with Rowe ami 100
Post by: mwelgat24 on December 27, 2014, 09:57:11 pm

Hi...I'm new to this forum. I recently purchased a1990 Rowe ami cd-100 jukebox. It worked when I purchased it and again after transporting it to another location. Two days ago I turned it on played great. I unplugged it and transported it to my house a few miles away, now it doesn't work and says out if order. I checked the ccc for dry joints and they looked fine.the r2 resistor was blown and I replaced it with a new resistor. I checked the battery and it was showing around 2.5 volts. Still doesn't work. Can someone help?

Title: Re: need help with Rowe ami 100
Post by: Ken Layton on December 27, 2014, 11:18:43 pm

I'm making these assumptions:

You properly secured the jukebox internal mechanisms for transport as described in the manual?

You transported the jukebox with it standing upright and not laying down?

You removed all the CDs from the machine before transporting?

Title: Re: need help with Rowe ami 100
Post by: mwelgat24 on December 27, 2014, 11:39:38 pm

 we took out the CDs and magazine rack. Transported the machine upright secured on a trailer.

Title: Re: need help with Rowe ami 100
Post by: mwelgat24 on December 28, 2014, 01:47:45 pm

I am getting code 05 63 08

Title: Re: need help with Rowe ami 100
Post by: ed12 on December 28, 2014, 02:25:18 pm

05 63 mech to ccc communication lost

ed

Title: Re: need help with Rowe ami 100
Post by: mwelgat24 on December 28, 2014, 02:46:39 pm

We just purchased this jukebox and have know post experience with one. What would cause this problem?

Title: Re: need help with Rowe ami 100
Post by: mwelgat24 on December 28, 2014, 04:38:52 pm

We replaced the battery in the ccc. Still saying out of order.