Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: newoski on December 10, 2014, 09:25:23 am

Title: Ultimarc MiniPac Harness
Post by: newoski on December 10, 2014, 09:25:23 am

Hi Guys,

Should the MiniPac harness be seated half-way on to the MiniPac card pins... or does it seat all the way down?

Mine seems to only fit half way down -- and I can still see half the pin(s) visible underneath it...

Thanks!

Title: Re: Ultimarc MiniPac Harness
Post by: PL1 on December 10, 2014, 01:41:50 pm

It should seat fully.

Verify that no pins are bent then *gently* rock the connector as you press down.


Scott

Title: Re: Ultimarc MiniPac Harness
Post by: newoski on December 10, 2014, 09:03:40 pm

Thanks!!