Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Blueic5 on November 15, 2014, 10:53:24 am
-
Hi
I've been building my cab for a couple of years now, anyway I thought I'd start on the Control panel. I've built the panel based on lusid design and 3/4 "mdf. So joysticks I'd rather mount from underneath to save routing as I just for now plan to paint and seal the top. Games I like are sf2, final fight etc but want play other games too. So initially was thinking a sanwa jlf but sounds a faff changing between 4/8 way and I'd need to route the top. Came across the ultimarc u360's ball tops and they appear to be bottom mountable. I see they do a top restrictor too which maybe useful and give it a nice feel. Is this my best bet will the throw be to long? Do I need to change the spring? Suggestions please :) oh and these would save me buying an ipac for now.
-
U360. Octagonal restrictor. Stiff spring. Lube the pivot with plumber's silicone grease. You're welcome.
-
Thanks, would I need the longer shaft? I take it you would go with this over the front mounted restrictor kit?