Build Your Own Arcade Controls Forum
Main => Software Forum => Topic started by: lammcspicy on October 30, 2014, 07:34:27 pm
-
guys,
I hope you can help.
I have a hyerspin front end and then use mame .
My problem started where pressing the p1 fire button would reset the rom. I made a video here http://youtu.be/83GWNpAMlLA (http://youtu.be/83GWNpAMlLA)
Somehow I resolved this issue but now the on screen volume button shows and it also fires at the same time. I made a video here http://youtu.be/qmQQm4-wNR8 (http://youtu.be/qmQQm4-wNR8)
I noticed the "on screen display" was set to use CTRL which is also the same key as FIRE. I changed that to NONE but now its back to resetting the rom.
Any ideas ?
-
Use mame independently and see if the problem persists. This will let us know if it's a mame or hyperspin issue.
-
thanks for the fast response. I played around with the key mapping some more and I seemed to have resolved it. Not sure how it started to begin with.
Problem was only present in mame. Is there a good guide somewhere on how to add a new roms to mame using the hyperspin front end .
thanks again
-
Is there a good guide somewhere on how to add a new roms to mame using the hyperspin front end .
thanks again
I use Don's Hyperspin Tools to "add" roms to my Hyperspin setup. http://honerbrink.com/?page_id=14 (http://honerbrink.com/?page_id=14)
http://www.youtube.com/watch?v=R3TXxQWJtc8#ws (http://www.youtube.com/watch?v=R3TXxQWJtc8#ws)
-
thanks for the fast response. I played around with the key mapping some more and I seemed to have resolved it. Not sure how it started to begin with.
Problem was only present in mame. Is there a good guide somewhere on how to add a new roms to mame using the hyperspin front end .
thanks again
Mame and hyperspin are two different things... Anyways, I'm glad you resolved your issue.