Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: britishknight on October 16, 2014, 08:38:13 pm

Title: T-Molding size question and options
Post by: britishknight on October 16, 2014, 08:38:13 pm

So I have done a far amount of work on a cabinet and its actually all assembled. The cabinet is made out of 5/8 MDF. I cut a slot with a 1/16 slot cutting bit.

Now that I look at the t-molding on t-molding.com, i see that their 5/8 t-molding needs .080.

Should I

A. Cut a bigger slot and buy the 5/8 t-molding
B. buy the 3/4 t-molding and trim it with a chisel (My control panel is 3/4 so I do need some 3/4 t-molding)

Let me know what you think

thanks

Title: Re: T-Molding size question and options
Post by: PL1 on October 16, 2014, 08:48:18 pm

If you want to trim the width of the t-molding, check out this post (http://forum.arcadecontrols.com/index.php/topic,132413.msg1360384.html#msg1360384).


Scott