Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: mahuti on December 12, 2003, 10:57:54 pm
-
Hey I've got a quick question.
On ultimarc's site, Andy explains how to connect his trackball up to an optipac. Wires listed are red 5v black grnd yel & green x1 x2.
My trackball that I ordered from him has red black white & brown wires.
I just wanna make sure that when I wire the black & red wires up to the 5v and ground, they're gonna be correct... I don't mind experimenting with the white and brown axis connections, but I don't wanna miswire the power & ground.
Also, I can daisy chain the grounds & the 5 v connection between my trackball and spinner right? Or do they have to have their own power & grounds wired separately?
TIA
-
red is definetly going to be power and black is ground. the different colored wires will be for your axis inputs.
if you want to be doubly sure, follow the wires up to the little red connector attatched to the trackball. that connector has each wire marked with a number, 1 - 4.
1. 5v
2. x or y axis 1
3. x or y axis 2
4. ground
and you shouldn't have any problem daisy chaining your power and grounds.
-
This really is the kind of query that it's best to ask via email to myself, I can give immediate help. In fact we changed the colour coding to the same as the Happ trackball, so the Happ pinout can be followed.
Please drop me an email if still unsure. Thanks
Andy
-
Thanks for the replies guys. Thanks Andy. I figure you get enough emails (and enough from me about product) Thanks for the interest though. I can always count on this board for support. You guys are great.