Build Your Own Arcade Controls Forum
Main => Artwork => Topic started by: rabidpuppy on September 28, 2014, 08:09:01 am
-
I've got a table top for a cocktail cabinet I'm making.
It is 16mm painted MDF, and has the monitor hole cut. A piece of glass will go on top.
I have a single large piece of self adhesive vinyl with the artwork, it doesn't have anything cut out.
I'm looking for application tips / how-to videos. I'm not sure what the best way is when there is the hole out of the table top. I had another piece of the same type of vinyl that I put on a monitor bezel for my upright, and had issues putting it on due to the cut out hole, on either side of the hole was hard to keep lined up.
Do I put something temporarily in the hole to help keep the vinyl straight?
-
Lots of good information on applying vinyl in this (http://forum.arcadecontrols.com/index.php/topic,120041.0.html) thread.
Look for the part of the video where he deals with the coin door hole in the kickplate.
Scott
-
Do it in a clean dust free workspace. I threw plenty out working in an outside she'd because of dirt or something getting underneath it causing tiny little bumps that you can't really get rid of.