Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: simko on September 21, 2014, 06:42:30 pm
-
Well everyone, all the parts and wires and all sorts of things have shown up, im ready to do some wiring!
the question is, what do i cut? :O
Ive purchased a GBS-8100 to connect VGA to CRT, and that will be connected to a downscaler which converts hdmi to VGA....
the problem is, on my crt monitor setup, i dont know what wires need to be used for the converter!
Ive taken a few pictures and pointed to some wires, i was just wondering which wires are crucial?
if you could point out which wires i need to use id greatly appreciate it!
(http://i1280.photobucket.com/albums/a483/simko/2014-09-21165414_zps632ee599.jpg) (http://s1280.photobucket.com/user/simko/media/2014-09-21165414_zps632ee599.jpg.html)
(http://i1280.photobucket.com/albums/a483/simko/2014-09-21165452_zpsda61f40c.jpg) (http://s1280.photobucket.com/user/simko/media/2014-09-21165452_zpsda61f40c.jpg.html)
(http://i1280.photobucket.com/albums/a483/simko/2014-09-21165452_zpsda61f40c.jpg) (http://s1280.photobucket.com/user/simko/media/2014-09-21165452_zpsda61f40c.jpg.html)
-
long no hear from ?
from the back going foward
r,g,b,gnd space sync/sync
i have them in stock come and get 1 if u want??
ring ring
ed
-
Is in not in the manual? It should be marked.
-
Let me elaborate a little more...judging by your monitor's snaps that's an A-1 from korea...there should be a sticker or something, but the instructions are here:
http://forums.arcade-museum.com/showthread.php?t=275986 (http://forums.arcade-museum.com/showthread.php?t=275986)
Basically it follows, from the left:Red,Green,Blue, Ground,H-Sync,V-Sync.