Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: ransome on September 19, 2014, 03:40:40 am

Title: Rowe R-86 transfer arm getting caught on turntable on the way up
Post by: ransome on September 19, 2014, 03:40:40 am

Rowe R-86 transfer arm getting caught on turntable on the way up. I was adjusting the opto and the the machine started playing very fast (which it stopped doing) and now every time I play a record it catches on the turntable , I then have to pull off the turntable and the transfer arm goes back in place.

Any ideas

Thanks Gregg


(http://imagizer.imageshack.us/v2/280x200q90/743/RFbX0R.jpg) (http://imageshack.com/f/knRFbX0Rj)

Title: Re: Rowe R-86 transfer arm getting caught on turntable on the way up
Post by: ami-man on September 19, 2014, 06:02:35 am

Hi Gregg,

I can't tell much from your picture it will not enlarge and it takes you to another site asking for a password.

The problem will be that the grommet is missing from the gripper bow side bracket, allowing the gripper bow to drop down and causing it to jam.

Regards
Alan

Alan Hood
ami-man