Build Your Own Arcade Controls Forum
Main => Driving & Racing Cabinets => Topic started by: kanario40 on August 30, 2014, 12:11:57 pm
-
In this forum thread I'll upload the process of restoration my Sega TouringCar cabinet I hope like you.
-Restoration Daytona steering wheel:
After making a successful test of hacking of steering wheel, the first thing I did was to clean the steering wheel and remove the rust that it had.
Here I leave the state when I arrived:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130326104852-Akiles-1.JPG) (http://gamoovernet.pixhotel.fr/pics/20130326104852-Akiles-1.JPG)
I started by removing all the rust with the help of a wire brush and in the most difficult places I used a Dremel tool with a brush:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130326105119-Akiles-2.JPG) (http://gamoovernet.pixhotel.fr/pics/20130326105119-Akiles-2.JPG)
You can see in the picture below before of brushing and after brushing:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130326105351-Akiles-3.JPG) (http://gamoovernet.pixhotel.fr/pics/20130326105351-Akiles-3.JPG)
Then I sanded the complete surface with a sandpaper of grit 400 and I painted with spray of color Chrom Silver.Only I gave a layer because is hidden inside the cabinet simulator and it,s the result:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130326105854-Akiles-4.jpg) (http://gamoovernet.pixhotel.fr/pics/20130326105854-Akiles-4.jpg)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130326110009-Akiles-5.jpg) (http://gamoovernet.pixhotel.fr/pics/20130326110009-Akiles-5.jpg)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130326110052-Akiles-6.jpg) (http://gamoovernet.pixhotel.fr/pics/20130326110052-Akiles-6.jpg)
Also I cleaned the two belts with a cloth dipped in water before mounting the metal chassis of the wheel.
Now it,s like new:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130326110316-Akiles-7.jpg) (http://gamoovernet.pixhotel.fr/pics/20130326110316-Akiles-7.jpg)
-Restoration of top part:Billboard and support of power supply,amplyfier ,etc.:
Like the billboard and marquee were in good conditions only I cleaned the dust of them:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130403232559-Akiles-8.JPG) (http://gamoovernet.pixhotel.fr/pics/20130403232559-Akiles-8.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130403232809-Akiles-9.jpg) (http://gamoovernet.pixhotel.fr/pics/20130403232809-Akiles-9.jpg)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130403232838-Akiles-10.JPG) (http://gamoovernet.pixhotel.fr/pics/20130403232838-Akiles-10.JPG)
Finally it is shiny:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130403233323-Akiles-11.JPG) (http://gamoovernet.pixhotel.fr/pics/20130403233323-Akiles-11.JPG)
The support of power supply ,amplifier etc,was very dirty:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130403233951-Akiles-12.JPG) (http://gamoovernet.pixhotel.fr/pics/20130403233951-Akiles-12.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130403234033-Akiles-13.JPG) (http://gamoovernet.pixhotel.fr/pics/20130403234033-Akiles-13.JPG)
I cleaned the support of wood and inside of three metal parts, two sides and a front more the door.
The outside metalic part was in good condition and only I cleaned:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130403235146-Akiles-14.JPG) (http://gamoovernet.pixhotel.fr/pics/20130403235146-Akiles-14.JPG)
But the inside was very dirty and I had to printed with spray paint(Metalic Grey)the three parts:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130403235459-Akiles-15.JPG) (http://gamoovernet.pixhotel.fr/pics/20130403235459-Akiles-15.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130403235534-Akiles-16.JPG) (http://gamoovernet.pixhotel.fr/pics/20130403235534-Akiles-16.JPG)
The resulted is this:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130403235655-Akiles-17.JPG) (http://gamoovernet.pixhotel.fr/pics/20130403235655-Akiles-17.JPG)
The metalic door was very rusted:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130404000108-Akiles-18.JPG) (http://gamoovernet.pixhotel.fr/pics/20130404000108-Akiles-18.JPG)
A part of metalic door sand it and other part without sand:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130404000428-Akiles-19.JPG) (http://gamoovernet.pixhotel.fr/pics/20130404000428-Akiles-19.JPG)
And I had to sanded and also printed it:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130404000516-Akiles-20.JPG) (http://gamoovernet.pixhotel.fr/pics/20130404000516-Akiles-20.JPG)
Complete Pedals Restauration:
When I bought the machine the pedals had this aspect:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413172429-Akiles-21.jpg) (http://gamoovernet.pixhotel.fr/pics/20130413172429-Akiles-21.jpg)
First I disassembled the pedals:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413172713-Akiles-22.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413172713-Akiles-22.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413172821-Akiles-23.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413172821-Akiles-23.JPG)
And the other base under of pedals:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413173000-Akiles-24.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413173000-Akiles-24.JPG)
I cleaned, removed all the rust and and then I painted it:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413173300-Akiles-25.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413173300-Akiles-25.JPG)
After I began with the other base of pedals:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413173509-Akiles-26.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413173509-Akiles-26.JPG)
I did the process itself like the other base.This is the resulted:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413173725-Akiles-27.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413173725-Akiles-27.JPG)
Also I painted the pedals protection:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413173900-Akiles-28.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413173900-Akiles-28.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413173935-Akiles-29.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413173935-Akiles-29.JPG)
And also I painted the screws of pedals base:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413174054-Akiles-30.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413174054-Akiles-30.JPG)
After I dissambled the two pedals,first the brake pedal:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413174244-Akiles-31.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413174244-Akiles-31.JPG)
And then the accelerator pedal:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413174400-Akiles-32.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413174400-Akiles-32.JPG)
Then I bought a metal plate slip in Leroy Merlin:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413174617-Akiles-33.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413174617-Akiles-33.JPG)
I cut two pieces of sheet metal with the shape of the pedals and I sticked to the surface of the pedals:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413175013-Akiles-34.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413175013-Akiles-34.JPG)
Then I mounted all parts of pedals in the base:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413175132-Akiles-35.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413175132-Akiles-35.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413175205-Akiles-36.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413175205-Akiles-36.JPG)
The last I did went the support of the feet.I remove the part of rubber:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413175351-Akiles-37.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413175351-Akiles-37.JPG)
And I placed two pieces of sheet metal like in the pedals:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413175631-Akiles-38.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413175631-Akiles-38.JPG)
At the end the complete resulted it,s this:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130413175754-Akiles-39.JPG) (http://gamoovernet.pixhotel.fr/pics/20130413175754-Akiles-39.JPG)
-Restauration of blue support and glass mask:
The glass mask had rests of the sticker:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130428155214-Akiles-40.JPG) (http://gamoovernet.pixhotel.fr/pics/20130428155214-Akiles-40.JPG)
And I cleaned with hot water.
Also the botton blue support was a little rusty and some parts had no paint:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130428155814-Akiles-41.JPG) (http://gamoovernet.pixhotel.fr/pics/20130428155814-Akiles-41.JPG)
And I painted with blue spray:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130428160038-Akiles-42.JPG) (http://gamoovernet.pixhotel.fr/pics/20130428160038-Akiles-42.JPG)
At the end this it,s the resulted:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130428160151-Akiles-43.JPG) (http://gamoovernet.pixhotel.fr/pics/20130428160151-Akiles-43.JPG)
-Adjust of Daytona Steering Wheel in the cabinet:
It has been a hard work but at the end I have get.
First this was the aspect of support of Original steering wheel:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509105244-Akiles-44.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509105244-Akiles-44.JPG)
I removed with a grinder all supports of wires:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509105526-Akiles-45.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509105526-Akiles-45.JPG)
And then I painted:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509105643-Akiles-46.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509105643-Akiles-46.JPG)
After I use four strong squadrons like this to hold it:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509105908-Akiles-47.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509105908-Akiles-47.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509110005-Akiles-48.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509110005-Akiles-48.JPG)
Before I marked and cutted a part of wood to move out the full steering wheel because needed to get a little out the axle:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509110638-Akiles-49.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509110638-Akiles-49.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509110723-Akiles-50.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509110723-Akiles-50.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509110845-Akiles-51.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509110845-Akiles-51.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509110933-Akiles-52.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509110933-Akiles-52.JPG)
After I put two little squadrons to avoid tipping up of support when I put the steering wheel at the front:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509111538-Akiles-53.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509111538-Akiles-53.JPG)
But after to do all this the axle need exit more out:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509111707-Akiles-54.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509111707-Akiles-54.JPG)
I had to cut a partof body of Steering wheel because has a right angle and the control panel and the blue support are in chamfer:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509112158-Akiles-55.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509112158-Akiles-55.JPG)
Also I had to cut the part metalic of buttons and the paret metalic of gear lever.The rest of chasis had to remove:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509113802-Akiles-56.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509113802-Akiles-56.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509113841-Akiles-57.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509113841-Akiles-57.JPG)
At the end It adjusted perfectly:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509114052-Akiles-58.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509114052-Akiles-58.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509114134-Akiles-59.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509114134-Akiles-59.JPG)
The body of Steering wheel is lash down with two screws:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509120533-Akiles-60.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509120533-Akiles-60.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130509114538-Akiles-61.JPG) (http://gamoovernet.pixhotel.fr/pics/20130509114538-Akiles-61.JPG)
-Fit the Led Monitor of 39 inches in the cabinet:
This is the hole of screen:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607230324-Akiles-62.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607230324-Akiles-62.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607230633-Akiles-63.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607230633-Akiles-63.JPG)
Like the LED monitor would not fit in the hole I had to cut the parts marked in red color:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607231012-Akiles-64.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607231012-Akiles-64.JPG)
I disconnected the two tweeters of the two side tables:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607231308-Akiles-65.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607231308-Akiles-65.JPG)
Here the two tables to cut:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607231414-Akiles-66.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607231414-Akiles-66.JPG)
After I did a template to get the perfect position of Led monitor:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607231620-Akiles-67.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607231620-Akiles-67.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607231659-Akiles-68.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607231659-Akiles-68.JPG)
Also I had to cut a part of the base because the monitor would not fit:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607231911-Akiles-69.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607231911-Akiles-69.JPG)
I placed a backing in the middle of the base and in the sides of the base:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607232217-Akiles-70.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607232217-Akiles-70.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607232306-Akiles-71.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607232306-Akiles-71.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607232358-Akiles-72.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607232358-Akiles-72.JPG)
Then I used these squadrons to attach the monitor to the cabinet:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607232522-Akiles-73.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607232522-Akiles-73.JPG)
And I also used two pieces of wood to fit the Led monitor:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607232714-Akiles-74.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607232714-Akiles-74.JPG)
Also I put in the base masking tape to avoid to the sawdust it comes off:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607233146-Akiles-75.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607233146-Akiles-75.JPG)
At the end it fitted the Led Monitor of this way in the cabinet:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607233450-Akiles-76.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607233450-Akiles-76.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607233527-Akiles-77.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607233527-Akiles-77.JPG)
And this is the final resulted:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607233754-Akiles-78.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607233754-Akiles-78.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130607233843-Akiles-79.JPG) (http://gamoovernet.pixhotel.fr/pics/20130607233843-Akiles-79.JPG)
-
-Restoration of coin tower:
This was the aspect of coin tower:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807172822-Akiles-80.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807172822-Akiles-80.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807173000-Akiles-81.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807173000-Akiles-81.JPG)
This was the aspect of the doors of coin tower before of paint:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807173140-Akiles-84.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807173140-Akiles-84.JPG)
And this after of paint them:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807173253-Akiles-85.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807173253-Akiles-85.JPG)
And also painted the tower:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807173402-Akiles-86.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807173402-Akiles-86.JPG)
This is the coin :
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807173725-Akiles-82.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807173725-Akiles-82.JPG)
And the box the coin:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130911000500-Akiles-83.JPG) (http://gamoovernet.pixhotel.fr/pics/20130911000500-Akiles-83.JPG)
Then remove the coin slot and did a system using a switch to give credits only with introduce the coins:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807174005-Akiles-87.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807174005-Akiles-87.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807174102-Akiles-88.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807174102-Akiles-88.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807174151-Akiles-89.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807174151-Akiles-89.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807174235-Akiles-90.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807174235-Akiles-90.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807174314-Akiles-91.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807174314-Akiles-91.JPG)
At the end the complete resulted after of put the two yellow locks:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807174447-Akiles-92.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807174447-Akiles-92.JPG)
-Restoration of Panel:
The panel of Sega Touring cabinet had this aspect:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807222147-Akiles-93.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807222147-Akiles-93.JPG)
I repaired all cigarrete burns with poliester mastic that it,s used to repair the bodywork of the cars:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807222524-Akiles-94.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807222524-Akiles-94.JPG)
After I connected the wires of buttoms and gear lever:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807231019-Akiles-95.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807231019-Akiles-95.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807231112-Akiles-96.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807231112-Akiles-96.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807231159-Akiles-97.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807231159-Akiles-97.JPG)
Then I put Vinilo Carbono 4D Brillo 80x152cm and sticked in the panel.I can´t stick of a piece because the panel had a lot curves and went imposible.Only I could stick it by parts but not differ much near joints.At the end I like the resulted,It,s see pretty well of near:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807223153-Akiles-95.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807223153-Akiles-95.JPG)
If anyone want buy that vinilo,it,s cheap and he has a quality very nice.
I bought this Vinilo Carbono 4D Brillo 60x152cm by 23,60 shipping included:
http://www.vinilopasion.com/productos/vinilo-carbono-4d-brillo-60x152cm (http://www.vinilopasion.com/productos/vinilo-carbono-4d-brillo-60x152cm)
I think to if I had had a air heater maybe I could had put all the vinilo of a piece but I doubt because the panel had enough curves.
-Put secuencial change in the cabinet:
I have adapted the secuencial change of a Sega Grand Prix steering wheel to my sega TouringCar this:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807234005-Akiles-99.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807234005-Akiles-99.JPG)
This the front part:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807234055-Akiles-100.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807234055-Akiles-100.JPG)
And this back part:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807234139-Akiles-101.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807234139-Akiles-101.JPG)
And this side face:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807234229-Akiles-102.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807234229-Akiles-102.JPG)
This it,s the complete secuencial change with all parts:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807234333-Akiles-103.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807234333-Akiles-103.JPG)
Then I painted with yellow spray the two parts yellow and with spray black metalic the other part:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807234710-Akiles-104.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807234710-Akiles-104.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807234802-Akiles-105.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807234802-Akiles-105.JPG)
Like I only had 7 cm between the steering wheel and the panel,I had to remove the last piece black of secuencial change because doens´t enter:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807234853-Akiles-106.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807234853-Akiles-106.JPG)
I had to do a new piece with a piece of sheet with this form.Also I had to do a hole more big with a pallet drill of 22mm in the secuencial change because the hole was more small that the axis of steering wheel:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807235148-Akiles-107.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807235148-Akiles-107.JPG)
Then I used a cheet to do the base of buttoms:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807235323-Akiles-108.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807235323-Akiles-108.JPG)
The buttoms led have five connections + and - of led buttom then NO to + of buttom and C to - of buttom.The other connection NC doesn´t use:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807235704-Akiles-109.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807235704-Akiles-109.JPG)
Then I bought a set of males of Metrica 6(drill of 5mm)to screw the two screws to the steering wheel:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130807235948-Akiles-110.JPG) (http://gamoovernet.pixhotel.fr/pics/20130807235948-Akiles-110.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130808000035-Akiles-111.JPG) (http://gamoovernet.pixhotel.fr/pics/20130808000035-Akiles-111.JPG)
At the end the resulted had been this:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130808000156-Akiles-112.JPG) (http://gamoovernet.pixhotel.fr/pics/20130808000156-Akiles-112.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130808000234-Akiles-113.JPG) (http://gamoovernet.pixhotel.fr/pics/20130808000234-Akiles-113.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130808000328-Akiles-114.JPG) (http://gamoovernet.pixhotel.fr/pics/20130808000328-Akiles-114.JPG)
-Restoration complete of the seat:
The aspect of base of seat was this:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910175122-Akiles-115.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910175122-Akiles-115.JPG)
The base was very rusted:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910175214-Akiles-116.jpg) (http://gamoovernet.pixhotel.fr/pics/20130910175214-Akiles-116.jpg)
I removed the rust with a drill and a wire brush:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910175611-Akiles-117.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910175611-Akiles-117.JPG)
And then I painted:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910175708-Akiles-118.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910175708-Akiles-118.JPG)
And Also I put a metallic plate:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910175805-Akiles-119.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910175805-Akiles-119.JPG)
After I unmounted the first base:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910180022-Akiles-120.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910180022-Akiles-120.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910180154-Akiles-121.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910180154-Akiles-121.JPG)
I also removed the rust:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910180303-Akiles-122.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910180303-Akiles-122.JPG)
And I painted it:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910180400-Akiles-123.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910180400-Akiles-123.JPG)
After I did process itself with the second metallic base taht hold the side rails of seat:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910180509-Akiles-124.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910180509-Akiles-124.JPG)
Under of seat is the subwoofer:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910180737-Akiles-125.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910180737-Akiles-125.JPG)
Then I unmounted the rear seatback:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910180913-Akiles-126.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910180913-Akiles-126.JPG)
The rear seatback was hold with six clamps:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910181009-Akiles-127.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910181009-Akiles-127.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910181157-Akiles-128.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910181157-Akiles-128.JPG)
Also in the rear seatback was the two speakers,left and right:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910181258-Akiles-129.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910181258-Akiles-129.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910181454-Akiles-130.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910181454-Akiles-130.JPG)
This went the paint cabin improvised:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910181621-Akiles-131.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910181621-Akiles-131.JPG)
And these the materials that I used more aguaplash paste that doens´t appears in the next image:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910181844-Akiles-132.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910181844-Akiles-132.JPG)
First I began with the seat, giving aguaplash paste to all damages:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910182350-Akiles-133.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910182350-Akiles-133.JPG)
After I gave white sealer primer to all the seat for palster after the yellow paint:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910182610-Akiles-134.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910182610-Akiles-134.JPG)
And then I painted giving two hands of yello paint in spray and after of dry the paint I gave other two hands of transparent varnish.
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910182724-Akiles-135.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910182724-Akiles-135.JPG)
I did the process itself with the seatback:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910182919-Akiles-136.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910182919-Akiles-136.JPG)
-Creation of base of seat:
I did a base for the seat because it hadn´t.
I used a metal platesto join the five parts that make up the base of seat:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910183528-Akiles-137.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910183528-Akiles-137.JPG)
I had to go adapting the metal plates to the inclination of each part:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910183727-Akiles-138.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910183727-Akiles-138.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910183839-Akiles-139.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910183839-Akiles-139.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910183952-Akiles-140.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910183952-Akiles-140.JPG)
After I covered the metal paltes with a layer of aguaplash plaste and I add two woods joined with two metal plates to the part of front:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910184252-Akiles-141.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910184252-Akiles-141.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910221525-Akiles-142.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910221525-Akiles-142.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910221733-Akiles-143.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910221733-Akiles-143.JPG)
Then I buy by 6 euros this piece of polipiel:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910221944-Akiles-144.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910221944-Akiles-144.JPG)
And this piece of foam also by 6 euros:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910222119-Akiles-145.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910222119-Akiles-145.JPG)
I holded a piece of foam with size itself that the base of seat:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910222422-Akiles-146.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910222422-Akiles-146.JPG)
Then I hissed the edges:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910222756-Akiles-147.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910222756-Akiles-147.JPG)
And holded other piece of foam a bit more small for to centre of seat:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910223023-Akiles-148.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910223023-Akiles-148.JPG)
After I used a manual staplerat stapling all around the end the aspect of upholstered seat is this:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910223252-Akiles-149.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910223252-Akiles-149.JPG)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910223518-Akiles-150.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910223518-Akiles-150.JPG)
Like yet was a bit hard when I sit down I put a piece of foam more under the base in the back and now it,s very comfortable:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910223709-Akiles-151.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910223709-Akiles-151.JPG)
Also like as I remained various parts of the metal plate I put them on the base:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910224359-Akiles-153.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910224359-Akiles-153.JPG)
At the end the final resulted it,s this:
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20130910224059-Akiles-152.JPG) (http://gamoovernet.pixhotel.fr/pics/20130910224059-Akiles-152.JPG)
To be continued...
-
Thanks for all the excellent pics.
Please just reply to this topic with future updates instead of starting a new thread though.
-
Awesome work kanario40, it's great to see such dedication in restoring beloved old arcade machines :)
-
kudos on the picture porn. great work, very meticulous!
-
LOVE it!!!!!!!!
-
Awesome job men :P :P :P
in the final show us some video please ;D
-
Excellent work man.